METCO Saleen Supercharger Pulley
2.80", Fits 2005 & Newer Mustang GT
Replace the original 4.00" pulley on your Saleen supercharger with our precision-machined 2.80" pulley for twelve additional pounds of boost. Our 6-rib billet pulley is CNC-machined for exact fit on the supercharger's 4-bolt pulley flange, and after machining the pulley is black anodized for long lasting surface protection.
This pulley is also available in incremental sizes as large as 3.80". These pulleys are also listed in this section.
METCO Saleen Supercharger Pulley
3.00", Fits 2005 & Newer Mustang GT
Replace the original 4.00" pulley on your Saleen supercharger with our precision-machined 3.00" pulley for ten additional pounds of boost. Our 6-rib billet pulley is CNC-machined for exact fit on the supercharger's 4-bolt pulley flange, and after machining the pulley is black anodized for long lasting surface protection.
This pulley is also available in incremental sizes as small as 2.80". These pulleys are also listed in this section.
METCO Saleen Supercharger Pulley
3.20", Fits 2005 & Newer Mustang GT
Replace the original 4.00" pulley on your Saleen supercharger with our precision-machined 3.20" pulley for eight additional pounds of boost. Our 6-rib billet pulley is CNC-machined for exact fit on the supercharger's 4-bolt pulley flange, and after machining the pulley is black anodized for long lasting surface protection.
This pulley is also available in incremental sizes as small as 2.80". These pulleys are also listed in this section.
METCO Saleen Supercharger Pulley
3.40", Fits 2005 & Newer Mustang GT
Replace the original 4.00" pulley on your Saleen supercharger with our precision-machined 3.40" pulley for six additional pounds of boost. Our 6-rib billet pulley is CNC-machined for exact fit on the supercharger's 4-bolt pulley flange, and after machining the pulley is black anodized for long lasting surface protection.
This pulley is also available in incremental sizes as small as 2.80". These pulleys are also listed in this section.
METCO Saleen Supercharger Pulley
3.60", Fits 2005 & Newer Mustang GT
Replace the original 4.00" pulley on your Saleen supercharger with our precision-machined 3.60" pulley for four additional pounds of boost. Our 6-rib billet pulley is CNC-machined for exact fit on the supercharger's 4-bolt pulley flange, and after machining the pulley is black anodized for long lasting surface protection.
This pulley is also available in incremental sizes as small as 2.80". These pulleys are also listed in this section.
METCO Saleen Supercharger Pulley
3.80", Fits 2005 & Newer Mustang GT
Replace the original 4.00" pulley on your Saleen supercharger with our precision-machined 3.80" pulley for two additional pounds of boost. Our 6-rib billet pulley is CNC-machined for exact fit on the supercharger's 4-bolt pulley flange, and after machining the pulley is black anodized for long lasting surface protection.
This pulley is also available in incremental sizes as small as 2.80". These pulleys are also listed in this section.
METCO Upper Control Arm
2005 & Newer Ford Mustang, Shelby GT500 (1 Control Arm)
The Metco Motorsports upper control arm is comprised of a precision-machined aluminum block housing a threaded steel pinion, a heavy-duty zinc-plated adjuster, and a precision-welded and plated clevis. The combination of these premium components results in a control arm that can be installed as a direct replacement for the factory control arm, but offers the benefits of in-car adjustability, the firm response of the upgraded bushing, and an independently-verified 400% increase in strength.
METCO Overdrive Crank Pulley
2005 & Newer Mustang 3V with Supercharger, 8-Rib Belt
This overdrive crank pulley assembly is designed for 3V Mustangs equipped with an aftermarket supercharger. The pulley is oversized to provide additional blower speed while avoiding the belt slippage issues associated with smaller supercharger pulleys.
The assembly is based on an OEM Ford harmonic balancer, which is precision-machined at our shop to accept the 7.55" billet overdrive pulley ring. The two components are fastened together using six black oxide-coated Grade 8 bolts.
METCO Shelby Throttle Body Adapter
2005 and Newer Ford Mustang 3V V8
An original Metco Motorsports design!
This cleverly-engineered kit is an easy bolt-on that provides dyno-proven gains in both horsepower and torque. This comprehensive kit includes a brand new Shelby GT500 throttle body direct from Ford, a five-axis CNC-machined billet adapter plate, billet mounting bolt bushings, and stainless steel mounting bolts.
Our kit is different from those offered by the competition in that our 1/2" thick adapter plate is engineered to exactly match the center of the throttle body bores with the center of the bores in the factory 3V intake manifold. This task required very careful measuring, design, and five-axis machining, but the end result is a smooth, tapered transition from the large Shelby throttle body to the factory intake manifold mounting flange. The adapter plate is machined for the included OEM-style seal for a factory-like installation.
METCO Shelby GT500 Supercharger Pulley
2007 and Newer Shelby GT500
One of our most popular products!
Replace the original 3.00" supercharger pulley with our 2.60" overdrive pulley to add 4-5 lbs of boost to your Shelby Mustang. The kit includes a pulley hub machined from high-grade steel that presses onto the blower shaft. The CNC-machined aluminum ring bolts to the steel hub using the supplied stainless steel fasteners, and this two-piece design makes subsequent pulley ring changes a snap.
METCO Shelby GT500 Supercharger Pulley
2007 and Newer Shelby GT500
One of our most popular products!
Replace the original 3.00" supercharger pulley with our 2.80" overdrive pulley to add 2-3 lbs of boost to your Shelby Mustang. The kit includes a pulley hub machined from high-grade steel that presses onto the blower shaft. The CNC-machined aluminum ring bolts to the steel hub using the supplied stainless steel fasteners, and this two-piece design makes subsequent pulley ring changes a snap.
METCO Shelby GT500 Supercharger Pulley
2007 and Newer Shelby GT500
This supercharger pulley kit is based on our popular 2.60" kit, but the included pulley ring matches the diameter of the original pulley at 3.00".
The kit includes a pulley hub machined from high-grade steel that presses onto the blower shaft. The CNC-machined aluminum ring bolts to the steel hub using the supplied stainless steel fasteners, and this two-piece design makes subsequent pulley ring changes a snap.
METCO Shelby GT500 Auxiliary Idler Kit
The Metco Motorsports auxiliary idler kit for the Shelby GT500 is cleverly engineered to be a simple bolt on and to be the ultimate solution to belt slippage.
The kit consists of a heavy-duty, precision-machined aluminum plate that offers three locations for the included 90mm idler pulley. The plate bolts to existing bolt bosses on the vehicle and locates the pulley just to the left of the supercharger pulley, maximizing belt wrap and eliminating slippage. No modifications to the vehicle are necessary. The required fasteners are included, as well as illustrated installation instructions.
Shelby GT500 Auxiliary Idler Kit
METCO Auxiliary Idler Kit
2007 and Newer Shelby GT500 with Kenne-Bell or Whipple Supercharger
The Metco Motorsports auxiliary idler kit for the Shelby GT500 is cleverly engineered to be a simple bolt on and to be the ultimate solution to belt slippage.
The kit consists of a heavy-duty, precision-machined aluminum plate and a billet 90mm idler pulley. The plate bolts to existing bolt bosses on the vehicle and locates the pulley just to the left of the supercharger pulley, maximizing belt wrap and eliminating slippage. No modifications to the vehicle are necessary. The required fasteners are included, as well as illustrated installation instructions.
2007 & Newer Shelby GT500
METCO Auxiliary Idler Kit with Double-Bearing Idler Pulley
The Metco Motorsports auxiliary idler kit for the Shelby GT500 is cleverly engineered to be a simple bolt on and to be the ultimate solution to belt slippage.
The kit consists of a heavy-duty, precision-machined aluminum plate that offers three locations for the included 90mm double-bearing idler pulley. The plate bolts to existing bolt bosses on the vehicle and locates the pulley just to the left of the supercharger pulley, maximizing belt wrap and eliminating slippage. No modifications to the vehicle are necessary. The required fasteners are included, as well as illustrated installation instructions.
