METCO 2005 & Newer Ford Fuel Block Kit
2005 and Newer Ford Mustang, including V6, GT, and Shelby GT500
This convenient billet adapter mounts directly to the factory (or aftermarket equivalent) driver's side fuel rail, sandwiched between the rail and the OEM fuel pressure sensor. The fuel block seals with OEM-style O-rings, so no gaskets or sealants are required. The installation is a quick and simple affair.
METCO 2005 & Newer Ford Fuel Block Kit with Gauge
This convenient billet adapter mounts directly to the factory (or aftermarket equivalent) fuel rail, sandwiched between the rail and the OEM fuel pressure sensor. The fuel block seals with OEM-style O-rings, so no gaskets or sealants are required. The installation is a quick and simple affair.
The CNC-machined block is tapped with two 1/8" NPT ports to provide a convenient tap for a fuel pressure gauge, a fuel source for a nitrous system, or both. This kit includes a 1.5" carbon fiber-faced fuel pressure gauge that can be mounted to the fuel block, and a stainless steel pipe plug (not shown) to seal the unused port if necessary.
METCO 2005 & Newer Mustang, Shelby GT500 (2 Driveshaft Loops)
This complete kit contains two separate loops, one for each section of the two-piece driveshaft found on the 2005 and newer Ford Mustang. For NHRA compliance, two loops are necessary in applications with two-piece driveshafts. These loops are custom-designed to take advantage of existing mounting points and no drilling is required for installation. The loops are made from heavy-duty steel that is laser-cut and CNC-bent for precision fit. All welds are performed using a fixture to ensure user-friendly installation. The finished loops are powdercoated black, and the kit is packaged with installation instructions and Grade 8 hardware.
METCO 2005 & Newer Mustang, Shelby GT500 (Front Loop Only)
This kit is based on the Metco MDL2005 driveshaft loop assembly, but contains only the front loop from that kit. This kit is designed for the user who has replaced the factory two-piece driveshaft with a one-piece aftermarket driveshaft. As described in the MDL2005 product description, this loop is custom-designed to take advantage of existing mounting points and requires no drilling for installation. The loop is made from heavy-duty steel that is laser-cut and CNC-bent for precision fit. All welds are performed using a fixture for consistency and ease of installation, and the finished loop is powdercoated black. The kit is packaged with installation instructions and Grade 8 hardware.
METCO 2005 & Newer Ford Mustang, Shelby GT500
The Metco Motorsports high performance lower control arms for the new Mustang are CNC-machined from 6061-T6511 billet aluminum for unsurpassed strength and precision-fit. The control arms are clear-anodized for long-lasting surface protection.
METCO Driveshaft Safety Loop - Rear Only
2005 and Newer Ford Mustang, Shelby GT500
This kit is based on the Metco Motorsports MDL2005 front and rear driveshaft loop kit for the Mustang (also listed in this section), but only includes the rear loop from that kit.
METCO Driveshaft Safety Loop - Rear Only
2005 and Newer Ford Mustang, Shelby GT500
This kit is based on the Metco Motorsports MDL2005 front and rear driveshaft loop kit for the Mustang (also listed in this section), but only includes the rear loop from that kit.
Like our front loop for this application, this loop is made from heavy-duty laser cut steel that is precision-bent on a CNC press, and then powdercoated for long lasting surface protection. This loop installs easily using existing attachment points and no drilling is required.
METCO Ford Fuel Line Adapter (Feed)
This adapter is a part of our popular MFF0008 fitting assembly that adapts the factory fuel feed line found on the 2005 & newer Mustang GT to our billet fuel rails.
The fitting is CNC-machined from stainless steel with 3/8" female threads at one end and the necessary coupling at the opposite end to mate with the OEM fuel feed line.
While specifically designed for the 4.6L V8 in the S197 Mustang, it may also fit other Ford EFI applications.
METCO 2005-2010 Mustang - Fuel Line Adapter (Return)
METCO Fuel Rail Adapter
2005 and Newer Ford Mustang 3V
This two-piece adapter is custom made to facillitate the installation of the Metco Motorsports fuel rail kit (MFR2005A) on vehicles using the factory fuel feed line. The adapter installs at the front of the driver's side fuel rail and mates directly with the OEM feed line.
METCO Mustang Fuel Rail Kit
2005 and Newer Ford Mustang
The Metco Motorsports fuel rail kit for the new Mustang includes rails precision machined from billet aluminum, not commonly available extruded rail stock like other fuel rail kits.
Because our rails are CNC-machined from billet, we were able to design them with the largest internal diameter available for this application at 11/16". The kit includes a custom-made braided stainless steel fuel crossover line with swivel fittings, a port plug for the front of the passenger side rail, and a #8 AN adapter for the front of the driver's side rail. These rails can be used with the factory returnless fuel system or with a custom return-style fuel system.
METCO Heavy Duty Upper Control Arm Bracket
2005 & Newer Ford Mustang, Shelby GT500
This new bracket is a direct replacement for the stock upper control arm bracket found on all 2005 and newer Mustangs. It is made from high-grade laser cut steel and is precision welded on a jig. The bracket is powdercoated for surface protection and includes an application-specific grade 8 front control arm bolt with matching hardware.
METCO Instant Center Modification Brackets
2005 & Newer Ford Mustang, Shelby GT500
The Metco relocation brackets are manufactured from heavy-duty laser-cut steel, precision-welded on a fixture, and powdercoated for long-lasting surface protection. The kit includes brackets for the left and right lower control arms, Grade 8 hardware, and detailed installation instructions.
METCO Mustang Fuel Rail Kit
2005 and Newer Ford Mustang
The Metco Motorsports fuel rail kit for the new Mustang includes rails precision machined from billet aluminum, not commonly available extruded rail stock like other fuel rail kits.
Because our rails are CNC-machined from billet, we were able to design them with the largest internal diameter available for this application at 11/16". The kit includes a custom-made braided stainless steel fuel crossover line with swivel fittings, a port plug for the front of the passenger side rail, and a #8 AN adapter for the front of the driver's side rail. These rails can be used with the factory returnless fuel system or with a custom return-style fuel system.
METCO 2005-2010 Mustang - Roush 2.57 Inch Supercharger Pulley
This 6-rib 2.57" pulley is a very popular upgrade for owners of new Mustangs equipped with Roush superchargers who wish to add more boost.
The pulley is CNC-machined from high-grade steel for precision fit and extreme durability, and the surface is black oxide-coated to prevent rust. The pulley is keyed and installs as a direct replacement for the original Roush supercharger pulley.
