Ford Racing Performance Parts - 1979-2004 Ford Mustang - Firewall Clutch Cable Adjuster

Fits 1979-2004 V6 and V8 Mustang
Allows you to adjust clutch engagement without going under the car
Eliminates the rubber bushing at the engine compartment bulkhead for more precise clutch action

Ford Racing Performance Parts - 97-03 Ford F-150 2WD LOWERING KIT

Fits 1997-2003 F-150 and 2004 Heritage 2WD Standard Cab, SuperCab and SuperCrew with V6 or V8 (Does not fit 4WD)

For 1999-2003 SVT F-150 Lightning see M-3000-L.

Lowers approximately. 2" front and 4" rear

Ford Racing Performance Parts - 99-04 LIGHTNING/HARLEY-DAVIDSON LOWERING KIT

Fits 1999-2004 F-150 Lightning/F-150 Harley-Davidson

Lowers front and rear approximately 1.0"

Improves appearance and lowers vehicle roll center for better handling with very acceptable ride characteristics

Includes front coil springs and jounce bumpers, rear shackles and hangers

FORD RACING PERFORMANCE PARTS 1986-1997 EFI MUSTANG FUEL PUMP
Fits 1986-1997 Mustang
High-flow, fuel tank-mounted fuel pump assembly eliminates top-end fuel starvation on modified 5.0L/4.6L engines.
Production flow rates of 88 liters/hr. (1988-1993, 1994 & up 110 liters/hr.)
Increases flow to a whopping 190 liters/hr. @ 40 psi

Ford Racing Performance Parts 1994-2004 Mustangs - FRONT LOWER CONTROL ARM KIT

This kit enables owners of 1994-2004 Mustangs to upgrade to the 2003 Cobra Mustang control arms. The kit features 2 front lower control arm assemblies with 50% stiffer front bushings and low-friction ball joints. This control arm has a redesigned stamping to improve the turning circle approximately 10% on 1994-1998 Mustangs

Ford Racing Performance Parts 1999-2004 Mustang GT/Cobra - Clutch Kit

NOTES: 1 Clutches have NO warranty! 2 All clutch discs have 1.0625"-10 spline hub. 3 Fits all 1986-01 Mustang GT, 1993-98 Cobra with T-5 or T45 Transmissions. 2001-04 Mustang GT with 3650 transmission and 1999-03 Cobra uses an 11" clutch. OK to mix and match Ford Racing clutch discs and pressure plates but do NOT install a FRPP pressure plate with a stock disc or vice-versa as disengagement problems may occur. Installation of 10.5" clutch assemblies on 1979-85 vehicles equipped with 10" clutch requires new flywheel (see page 116). Metric fasteners and dowel pins must be used with 10.5" clutches. 4 Requires metric pressure plate bolts N602549-S51M and alignment dowel pins D1FZ-6397-

Ford Racing Performance Parts 1999-2004 Mustang GT/Cobra - Clutch Kit

NOTES: 1 Clutches have NO warranty! 2 All clutch discs have 1.0625"-10 spline hub. 3 Fits all 1986-01 Mustang GT, 1993-98 Cobra with T-5 or T45 Transmissions. 2001-04 Mustang GT with 3650 transmission and 1999-03 Cobra uses an 11" clutch. OK to mix and match Ford Racing clutch discs and pressure plates but do NOT install a FRPP pressure plate with a stock disc or vice-versa as disengagement problems may occur. Installation of 10.5" clutch assemblies on 1979-85 vehicles equipped with 10" clutch requires new flywheel (see page 116). Metric fasteners and dowel pins must be used with 10.5" clutches. 4 Requires metric pressure plate bolts N602549-S51M and alignment dowel pins D1FZ-6397-

Ford Racing Performance Parts 2005-2009 MUSTANG GT - POWER UPGRADE PACKAGE

Fits 2005-2009 Mustang GT with manual or automatic transmission. For 2010 Mustang GT see M-FR1-MGTA

Approximate increase of 20 peak hp over stock

Ford Racing Performance Parts 2005-2010 MUSTANG GT - ADJUSTABLE DROP LINK KIT

* Class legal replacement for the Mustang FR500S race car
* For use in FR500S
* Fits all 2005-2010 Mustangs
* Allows adjustment of front Anti-Roll Bar preload without removal of the drop link

Ford Racing Performance Parts 2005-2010 MUSTANG GT - ANTI-ROLL BAR KIT

Ford Racing's Anti-roll bar kit designed for increased handling and performance on 2005-2010 Mustang GT coupe

Ford Racing Performance Parts 2005-2010 MUSTANG GT - ANTI-ROLL BAR KIT

# Anti-roll bar kit designed for increased handling and performance on 2005-2010 Mustang GT coupe
# Best when used with M-18000-A dampers and M-5300-K springs (1.5" Drop), or M-5300-P springs (1.0" Drop)
# Includes all mouting hardware

Note:Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications.

Ford Racing Performance Parts 2005-2010 Mustang GT - BUSHING KIT

* Includes all the bushings to rebuild the M-5490-A sway bar kit
* Urethane bushings should be checked every 12 months of use

Package Dimensions:
2.00 x 10.00 x 5.00

Package Weight:
1.50 lbs

Part Type:
Chassis: Control Arms / Stabilizers

Instruction Sheet:
None

Warranty Availability:
N/A

Ford Racing Performance Parts 2005-2010 MUSTANG GT - COLD AIR KIT WITH PERFORMANCE CALIBRATION

Fits 2005-2009 Mustang GT with manual or automatic transmission. Approximate increase of 20 hp over stock

Ford Racing Performance Parts 2005-2010 MUSTANG GT - DUAL FUEL PUMP KIT

Includes harness, dual fuel pumps, drop in housing and fuel pump driver module from the 2007-2009 SVT Mustang
Includes all installation hardware
Highly recommended for any application making over 400 hp
Note: Use of this kit in a 2010 Mustang will result in an incorrect fuel gauge reading

Ford Racing Performance Parts 2005-2010 MUSTANG GT - FRONT LOWER A-ARM BRACE UPGRADE KIT

* Fits 2005-2010 Mustang GT Coupe
* Original equipment on convertible and 2007-2009 Mustang SVT
* Increases chassis stiffness