METCO Crank Pulley Ring (Ring Only)
1999-2004 Lightning, 2003-2004 Mustang Cobra
Our crank pulley rings are designed for use with our Metco Motorsports Interchangeable Crank Pulley Kit offered for the supercharged Lightning truck and the supercharged Mustang Cobra.
These crank pulley rings are precision-machined from billet aluminum and then black-anodized for good looks and long-lasting surface protection.
If you already have the Interchangeable Crank Pulley Kit on your vehicle, one of these crank pulley rings is all that is needed to change your boost level.
METCO Ford Fuel Rail Adapter
This exclusive adapter is only available from Metco Motorsports!
This adapter fitting is CNC-machined from stainless steel and attaches directly to the schrader valve outlet on the Ford factory fuel rail. The front side of the fitting accepts a standard 1/8" NPT fitting for a direct-mount fuel gauge or a gauge sending unit.
METCO Ford Rail Mount Fuel Gauge
Ford Fuel Rail Gauge Kit
5.0 Mustang, 4.6 Cobra, Lightning
This exclusive kit is only available from Metco Motorsports!
This kit is based on our exclusive adapter fitting that is CNC-machined from stainless steel. The adapter attaches directly to the schrader valve outlet on the Ford factory fuel rail, and the opposite side of the fitting accepts the standard 1/8" NPT fitting for the included 1.5" fuel pressure gauge.
METCO Idler Pulley
2003-2004 Mustang Cobra, 1999-2004 Lightning, 2003-2004 Harley Davidson F150
This billet idler pulley is identical to the Metco Motorsports MIP-100 idler pulley except that it is 10mm smaller in size to match the OEM idler pulleys. The larger 100mm diameter of the MIP-100 is designed for use in auxiliary idler applications where a smaller than stock supercharger pulley is installed.
This 90mm pulley is CNC-machined from billet aluminum and black hard-coat anodized on the belt surface and back side for long-lasting surface protection. A heavy-duty bearing is precision-fit into the center bore, and a snap-ring ensures everything stays in place.
METCO Supercharger Pulley
1999-2004 Lightning, 2003-2004 Mustang Cobra
Replace the original 3.60" (Cobra) or 2.93" (Lightning) supercharger pulley with one of our overdrive pulleys to add boost to your Cobra or Lightning truck. The kit includes one pulley hub machined from high-grade steel that presses onto the blower shaft, and a CNC-machined aluminum ring bolts to the steel hub using the supplied stainless steel fasteners. This two-piece design makes subsequent pulley ring changes a snap.
METCO Pulley Removal & Installation Tool
Cobra, Lightning, and Shelby GT500
This high-quality tool kit can be configured to remove a supercharger pulley and to install a supercharger pulley. It is precision-machined from the highest quality materials and is designed to be re-used many times.
The kit is designed specifically for use on the factory-supercharged modular applications, and is configured so that the supercharger will not be scratched or damaged in any way when the tool is used. Illustrated instructions are included.
METCO Supercharger Pulley Ring
1999-2004 Lightning, 2003-2004 Mustang Cobra
These pulley rings are designed for use with Metco Motorsports two-piece supercharger pulleys. If you already have a Metco supercharger pulley on your Lightning or Cobra, one of these rings is all that is needed to change the boost level on your vehicle. These pulley rings will bolt to your existing pulley hub using the same (4) fasteners, and no special tools are required for the change.
METCO Tensioner Support Plate
Fits Lightning & HD F150, 2003-2004 Mustang Cobra, 2005 and Newer 3V Mustang
An Original Metco Motorsports Design!
This billet aluminum plate was designed as a solution to the problem of the factory Ford belt tensioner deflecting under load in supercharged applications. The factory tensioner arm tends to flex toward the front of the vehicle under heavy belt loads, allowing the belt to slip. Adding boost with custom pulleys or adding an aftermarket supercharger to your vehicle loads the belt further, compounding the flex problem.
METCO Tensioner Support Plate
Fits 2V & 3V Mustang, 2003-2004 Mustang Cobra, Lightning
Original Metco Motorsports Design!
This billet aluminum plate was designed as a solution to the problem of the factory Ford belt tensioner deflecting under load in supercharged applications. The factory tensioner arm tends to flex toward the front of the vehicle under heavy belt loads, allowing the belt to slip. Adding boost with custom pulleys or adding an aftermarket supercharger to your vehicle loads the belt further, compounding the flex problem.
Your cart 