METCO - Cobra, Lightning & GT500 - Pulley Removal & Installation Tool
METCO Pulley Removal & Installation Tool
This high-quality tool kit can be configured to remove a supercharger pulley and to install a supercharger pulley. It is precision-machined from the highest quality materials and is designed to be re-used many times.
The kit is designed specifically for use on the factory-supercharged modular applications, and is configured so that the supercharger will not be scratched or damaged in any way when the tool is used. Illustrated instructions are included.
METCO Crank Pulley Ring (Ring Only)
1999-2004 Lightning, 2003-2004 Mustang Cobra
Our crank pulley rings are designed for use with our Metco Motorsports Interchangeable Crank Pulley Kit offered for the supercharged Lightning truck and the supercharged Mustang Cobra.
These crank pulley rings are precision-machined from billet aluminum and then black-anodized for good looks and long-lasting surface protection.
If you already have the Interchangeable Crank Pulley Kit on your vehicle, one of these crank pulley rings is all that is needed to change your boost level.
METCO Idler Pulley
2003-2004 Mustang Cobra, 1999-2004 Lightning, 2003-2004 Harley Davidson F150
This billet idler pulley is identical to the Metco Motorsports MIP-90 idler pulley except that is 10mm larger. The larger size is designed for use in auxiliary idler applications where a smaller than stock supercharger pulley is installed.
METCO Supercharger Pulley Hub
1999-2004 Lightning, 2003-2004 Mustang Cobra
This precision-machined steel press-on pulley hub is the same as the hub included with the Metco Motorsports interchangeable supercharger pulley kit for the Cobra & Lightning.
METCO Supercharger Pulley Ring
1999-2004 Lightning, 2003-2004 Mustang Cobra
These pulley rings are designed for use with Metco Motorsports two-piece supercharger pulleys. If you already have a Metco supercharger pulley on your Lightning or Cobra, one of these rings is all that is needed to change the boost level on your vehicle. These pulley rings will bolt to your existing pulley hub using the same (4) fasteners, and no special tools are required for the change.
METCO Tensioner Support Plate
Fits Lightning & HD F150, 2003-2004 Mustang Cobra, 2005 and Newer 3V Mustang
An Original Metco Motorsports Design!
This billet aluminum plate was designed as a solution to the problem of the factory Ford belt tensioner deflecting under load in supercharged applications. The factory tensioner arm tends to flex toward the front of the vehicle under heavy belt loads, allowing the belt to slip. Adding boost with custom pulleys or adding an aftermarket supercharger to your vehicle loads the belt further, compounding the flex problem.
METCO Idler Pulley
2003-2004 Mustang Cobra, 1999-2004 Lightning, 2003-2004 Harley Davidson F150
This billet idler pulley is identical to the Metco Motorsports MIP-100 idler pulley except that it is 10mm smaller in size to match the OEM idler pulleys. The larger 100mm diameter of the MIP-100 is designed for use in auxiliary idler applications where a smaller than stock supercharger pulley is installed.
This 90mm pulley is CNC-machined from billet aluminum and black hard-coat anodized on the belt surface and back side for long-lasting surface protection. A heavy-duty bearing is precision-fit into the center bore, and a snap-ring ensures everything stays in place.
METCO 2003-2004 Cobra - Adjustable Crank Idler Plate Kit
METCO Adjustable Crank Idler Plate Kit
2003-2004 Mustang Cobra
The Metco Motorsports Adjustable Crank Idler Plate is similar to the billet plate included with the Metco Interchangeable Crank Pulley Kit, but it includes an added feature.
The plate relocates the crank idler slightly to provide the necessary clearance for oversize crank pulley rings, but what makes this plate unique is the included adjuster mechanism. The adjuster alows the user to manually optimize the position of the crank idler pulley.
METCO 2003-2004 Cobra - Auxillary Idler Kit 90mm
This popular kit is designed to bolt on with no modifications and virtually eliminate belt slippage at the supercharger pulley. The included aluminum mounting bracket is precision-machined and mounts to existing bolt locations, and the unique design provides unmatched durability and strength.
This kit includes a black hardcoat-anodized 90mm idler pulley, which is the smaller size that serves to maximize belt wrap in applications using stock size supercharger pulleys.
METCO 2003-2004 Cobra - Auxilliary Idler Kit 100mm
This popular kit is designed to bolt on with no modifications and virtually eliminate belt slippage at the supercharger pulley. The included aluminum mounting bracket is precision-machined and mounts to existing bolt locations, and the unique design provides unmatched durability and strength.
METCO Double Bearing Idler Pulley 100mm
2003-2004 Mustang Cobra, 1999-2004 Lightning
This billet idler pulley is specifically designed for severe-duty applications, such as those running higher boost levels or aftermarket superchargers like a Whipple or a Kenne-Bell.
The pulley is machined to accept twin bearings to provide added stability and the ability to withstand excessive belt loads. The pulley is hard-coat anodized in black and includes a separate bearing dust cover and stainless steel fastener.
METCO Double-Bearing Idler Pulley 90mm
2003-2004 Mustang Cobra, 1999-2004 Lightning
This billet idler pulley is specifically designed for severe-duty applications, such as those running higher boost levels or aftermarket superchargers like a Whipple or a Kenne-Bell.
The pulley is machined to accept twin bearings to provide added stability and the ability to withstand excessive belt loads. The belt surface and back side of the pulley is hard-coat anodized in black, and a separate bearing dust cover and stainless steel fastener are included.
METCO Interchangeable Crank Pulley Kit
2003-2004 Ford Mustang Cobra
Interchangeable Crank Pulley Kit (Includes Two Pulley Rings)
This comprehensive kit allows the user to replace the heavy factory crankshaft pulley and cage assembly with a lightweight, precision-machined aluminum hub and interchangeable outer ring. The kit includes all of the necessary hardware, including a billet bracket to cleanly relocate the factory crank idler pulley. Once this kit is installed, the user can adjust the vehicle's boost level by simply changing the outer pulley ring to any of the available Metco pulley rings, a process that takes just minutes.
METCO Underdrive Alternator Pulley
2003-2004 Mustang Cobra
Underdrive Alternator Pulley
Our underdrive alternator pulleys are CNC-machined from billet aluminum and black anodized for long-lasting surface protection. The pulleys are sized to maintain proper alternator speed when used on 2003 and 2004 Mustang Cobras equipped with the Metco Motorsports Interchangeable Crank Pulley Kit.
These alternator pulleys install as a direct replacements for the factory alternator pulley and require no modifications or special tools.
METCO Interchangeable Crank Pulley Kit
2003-2004 Ford Mustang Cobra
Interchangeable Crank Pulley Kit (Includes One Pulley Ring)
This comprehensive kit allows the user to replace the heavy factory crankshaft pulley and cage assembly with a lightweight, precision-machined aluminum hub and interchangeable outer ring. The kit includes all of the necessary hardware, including a billet bracket to cleanly relocate the factory crank idler pulley. Once this kit is installed, the user can adjust the vehicle's boost level by simply changing the outer pulley ring to any of the available Metco pulley rings, a process that takes just minutes.
