Autometer Wideband A/F Ratio Gauge - Phantom II series. 2 1/16" Diameter.
Includes wide band oxygen sensor. This gauge displays both a bar graph and digital numbers. Air fuel ratio can be programmed for gasoline and alternate fuels (ethanol, methanol, propane, and CNG) from 6:1 to 20:1 depending on fuel type.
Ford Racing Performace Parts - 1996-2004 Mustang - HD Aluminum driveshaft assembly Manual transmission
Fits 1996-04 Mustang and 1996-98 Cobra 4.6L with manual transmission. 31 spline yoke
High strength, 3.5" diameter 0.114" wall thickness 6061-RT62 aluminum seamless drawn tube
1330 U-joints 45.5" long (CL to CL of U-joints)
Will not fit 1999-04 Cobra
Magnaflow FORD MUSTANG Exhaust Pipe PERFORMANCE EXHAUST
Material:
Tubing O.D. Size:
System Type:
TIP O.D. Size:
TIP Quantity:
Single/Dual:
Exit Position:
Features and Benefits:
*Please Note: NOT FOR SALE OR INSTALLATION ON POLLUTION CONTROLLED VEHICLES IN CALIFORNIA, OFF ROAD USE ONLY, NOT INTENDED FOR USE ON PUBLIC ROADS AND HIGHWAYS
BBK Performance Parts - 1996-2004 Ford Mustang - Cobra - 65mm Throttle Body
All BBK 1996-2004 Mustang Cobra throttle bodies are designed to increase airflow and improve horsepower from between 7-12 HP depending on vehicle and application.
BBK are the world’s number one manufacturer of aftermarket performance throttle bodies for late model EFI performance cars and trucks.
BBK Performance Parts - 2003-2004 Mustang Cobra - 65mm Throttle Body
All BBK 2003-2004 Mustang Cobra supercharged throttle bodies are designed to increase airflow and improve horsepower from between 12-25 HP depending on vehicle and application.
BBK are the world’s number one manufacturer of aftermarket performance throttle bodies for late model EFI performance cars and trucks.
Ford Racing Performace Parts - 1999-2004 Mustang - Clutch Kit
NOTES: 1 Clutches have NO warranty! 2 All clutch discs have 1.0625"-10 spline hub. 3 Fits all 1986-01 Mustang GT, 1993-98 Cobra with T-5 or T45 Transmissions. 2001-04 Mustang GT with 3650 transmission and 1999-03 Cobra uses an 11" clutch. OK to mix and match Ford Racing clutch discs and pressure plates but do NOT install a FRPP pressure plate with a stock disc or vice-versa as disengagement problems may occur. Installation of 10.5" clutch assemblies on 1979-85 vehicles equipped with 10" clutch requires new flywheel (see page 116). Metric fasteners and dowel pins must be used with 10.5" clutches. 4 Requires metric pressure plate bolts N602549-S51M and alignment dowel pins D1FZ-6397-
BMR Fabrication 1999-2001 Mustang Lower Control Arms w/radial bearings
Stock control arms are marginal at best. Bushing deflection combined with control arm flex creates erratic handling and inconsistent rear end stability when subjected to the added loads of performance driving. BMR control arms are built using 1-5/8" x .120" DOM tubing and utilize 1/4" thick mounting plates for a bulletproof combination. Upper control arms are available in either fixed or adjustable versions. Adjustable uppers allow "on-car" adjustability by simply loosening the jamnuts and turning the adjuster. This allows you to adjust your pinion angle without unbolting the control arm, a convenience not offered by most other companies. These adjusters are by far the strongest in the industry. Made from 1-1/8" CNC machined steel and then zinc plated for corrosion resistance, they truly are overkill! Both upper and lowers are available with either polyurethane bushings or Teflon lined spherical bearings. With our variety of choices, we have control arms that are equally at home on the street, drag strip or road coarse. Available in Black Hammertone or red powdercoat.
BBK Performance Parts - 1996-2004 Ford Mustang - Cobra - 62mm Throttle Body
All BBK 1996-2004 Mustang Cobra throttle bodies are designed to increase airflow and improve horsepower from between 7-12 HP depending on vehicle and application.
BBK are the world’s number one manufacturer of aftermarket performance throttle bodies for late model EFI performance cars and trucks.
METCO 1999-2004 Ford Mustang (Without IRS)
The Metco Motorsports high performance lower control arms for the Ford Mustang are CNC-machined from 6061-T6511 billet aluminum for unsurpassed strength and precision-fit. The control arms are clear-anodized for long-lasting surface protection.
BBK Performance Parts - 1996-2004 Ford Mustang - Valve Covers W/ Driver Side Oil Fill (Chrome Plated)
As the first aftermarket valve covers for the 3.8L and 4.6L 2V Ford models, BBK engineers went the extra mile to deliver a winning combination of great looks and function.
BBK Performance Parts - 1996-2004 Ford Mustang - Valve Covers W/ Passenger Side Oil Fill (Chrome Plated)
As the first aftermarket valve covers for the 3.8L and 4.6L 2V Ford models, BBK engineers went the extra mile to deliver a winning combination of great looks and function.
BBK Performance Parts - 1996-2004 Ford Mustang GT - Valve Covers W/ Passenger Side Oil Fill (Chrome Plated)
As the first aftermarket valve covers for the 3.8L and 4.6L 2V Ford models, BBK engineers went the extra mile to deliver a winning combination of great looks and function.
BBK Performance Parts - 1996-2004 Ford Mustang - 75mm Throttle Induction System
This kit include a Power-Plus series throttle body and a BBK cold air induction system. Direct bolt on performance parts guaranteed to deliver more horsepower and more savings in one box.
BBK Performance Parts - 1996-2004 Ford Mustang GT & Cobra - Mid X Pipe With Converters
BBK Performance mid X pipes are specifically designed to be used with BBK full length headers to complete installation to cat back exhaust system.
Flowmaster Exhaust 1999-2004 Mustang Cobra - Cat-back System - Dual Rear Exit - American Thunder - Moderate Sound
For the person who is looking for a complete cat-back dual exhaust system with an aggressive tone. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially selected mufflers. American Thunder?
