Ford Racing Performace Parts - 1996-1998 Mustang - 30 LB/HR Fuel injector set
30 lb/hr, 4-hole, high-impedance fuel injector with Jetronic/Minitimer electrical connector
All injector flow rates are quoted at a delta pressure of 39.15 psi. To convert to a delta pressure of 43.5 psi, multiply flow rate by 1.054.
METCO 1979-2010 Mustang & Ford Truck - Fuel Rail Adapter
METCO Ford Fuel Rail Adapter
This exclusive adapter is only available from Metco Motorsports!
This adapter fitting is CNC-machined from stainless steel and attaches directly to the schrader valve outlet on the Ford factory fuel rail. The front side of the fitting accepts a standard 1/8" NPT fitting for a direct-mount fuel gauge or a gauge sending unit.
METCO 1979-2010 Mustang & Ford Truck - Rail Mount Fuel Gauge
METCO Ford Rail Mount Fuel Gauge
Ford Fuel Rail Gauge Kit
5.0 Mustang, 4.6 Cobra, Lightning
This exclusive kit is only available from Metco Motorsports!
This kit is based on our exclusive adapter fitting that is CNC-machined from stainless steel. The adapter attaches directly to the schrader valve outlet on the Ford factory fuel rail, and the opposite side of the fitting accepts the standard 1/8" NPT fitting for the included 1.5" fuel pressure gauge.
METCO 1999-2004 Mustang - Ford Fuel Block Kit without Gauge
METCO Fuel Block Kit
This convenient billet adapter mounts directly to the factory (or aftermarket equivalent) fuel rail, sandwiched between the rail and the OEM fuel pressure sensor. The fuel block seals with OEM-style O-rings, so no gaskets or sealants are required. The installation is a quick and simple affair.
The block has one 1/8" NPT port on each side, providing a convenient tap for a fuel pressure gauge, a tap for a nitrous system, or both. A stainless steel pipe plug (not shown) is included to plug one port if the port is unused.
METCO Fuel Block Kit
1999-2004 Ford Mustang, including V6 and GT
This convenient billet adapter mounts directly to the factory (or aftermarket equivalent) fuel rail, sandwiched between the rail and the OEM fuel pressure sensor. The fuel block seals with OEM-style O-rings, so no gaskets or sealants are required. The installation is a quick and simple affair.
The block has one 1/8" NPT port on each side, providing a convenient tap for a fuel pressure gauge, a tap for a nitrous system, or both. A stainless steel pipe plug (not shown) is included to plug one port if the port is unused.
The kit includes the CNC-machined fuel block, O-rings, one stainless steel 1/8" pipe plug, and mounting hardware.
Note: This fuel block is available separately under Metco Motorsports PN MFF0003.
Your cart 