An easy way to adjust your springs.
This spanner wrench set is needed to adjust the QA1 coil-over shock's spring seat.
QA1 (HAL) Shocks - 1993-2002 Camaro and Firebird - Spanner Wrench
For adjustments on QA1 (HAL Series Shocks)
QA1 - 1993-2002 Camaro and Firebird - Shock spacer
BMR shock spacers install between the shock and the shock mount on the A-arm. These can be used to raise the front of the car without adjusting the spring. Each spacer will raise the car 1/2" and can safely be double stacked to gain 1". Made from 6061 T6 aluminum.
An easy way to adjust your springs.
This spanner wrench set is needed to adjust the QA1 coil-over shock's spring seat. This kit also includes a set of thrust washers and torrington needle bearings to provide for bind-free spring movement and easy ride height adjustments. Kit includes parts to do two springs.
QA1 - 1993-2002 Camaro and Firebird- Front Springs
QA1 Motorsports offers the perfect spring for the 1993 to 2002 Camaro/Firebird front suspension using the QA1 GEN-F front shocks. Purposely built with factory and modified small block cars in mind, it is designed to sit on the GEN-F front shock's spring seat and fit into the factory location at the top. When used in conjunction with the GEN-F front shock, it's unmatched in ease of installation and performance.
Tokico Shocks - 1993-2002 Camaro and Firebird - Rear HP Series Shocks
TOKICO's HP Series - the famous "Blue Shock" - continues to be the overwhelming choice of performance enthusiasts looking for the best in overall handling and ride quality. The HP Series damping typifies TOKICO's valving flexibility and philosophy by minimizing low speed damping force and greatly increasing damping at medium and high piston speeds for improved compliance, tire adhesion and handling.
QA1 (HAL) Shocks - 1993-2002 Camaro and Firebird - 275 lb. front spring - recommended for drag racing
FRONT - QA1 Shocks produce the single best shocks available for GM F-body cars(1993-Present Camaros and Firebirds). Street, strip, or handling, this is the shock that can do it all! The GEN-F provides machined aluminum, externally adjustable shocks designed specifically for this series chassis. The valving adjustment is made with a single knob at the base of the shock(12 settings total), enabling you to adjust to changing track conditions or for ride comfort. The GEN-F shock is machined aluminum, bright anodized, and incorporates No. 8 Acme threads for easy ride height adjustments. Combined with QA1's exclusive, F-body specific coil over springs, this shock combines ride height and valving adjustability making this combination the dominant force on the track or street
QA1 (HAL) Shocks - 1993-2002 Camaro and Firebird - 300 lb. front spring - recommended for street and strip
FRONT - QA1 Shocks produce the single best shocks available for GM F-body cars(1993-Present Camaros and Firebirds). Street, strip, or handling, this is the shock that can do it all! The GEN-F provides machined aluminum, externally adjustable shocks designed specifically for this series chassis. The valving adjustment is made with a single knob at the base of the shock(12 settings total), enabling you to adjust to changing track conditions or for ride comfort. The GEN-F shock is machined aluminum, bright anodized, and incorporates No. 8 Acme threads for easy ride height adjustments. Combined with QA1's exclusive, F-body specific coil over springs, this shock combines ride height and valving adjustability making this combination the dominant force on the track or street.
QA1 (HAL) Shocks - 1993-2002 Camaro and Firebird - 325 lb. front spring - recommended for handling
FRONT - QA1 Shocks produce the single best shocks available for GM F-body cars(1993-Present Camaros and Firebirds). Street, strip, or handling, this is the shock that can do it all! The GEN-F provides machined aluminum, externally adjustable shocks designed specifically for this series chassis. The valving adjustment is made with a single knob at the base of the shock(12 settings total), enabling you to adjust to changing track conditions or for ride comfort. The GEN-F shock is machined aluminum, bright anodized, and incorporates No. 8 Acme threads for easy ride height adjustments. Combined with QA1's exclusive, F-body specific coil over springs, this shock combines ride height and valving adjustability making this combination the dominant force on the track or street.
BMR Fabrication 1993-2002 Camaro and Firebird - New design lowering springs - Rear springs only
Increase the cornering capabilities of your car dramatically by increasing the spring rate and lowering the center of gravity. BMR springs lower the car 1.25" yet retain the OE ride quality. Available in red powdercoat only. Click HERE to view a car lowered with BMR springs. Spring rates:
REAR: 160 lbs/in Dual Rate
QA1 1993-2002 Camaro & Firebird - 12 Way Single Adj. Rear Shock
Designed just for race classes where stock suspensions are required, the Gen-F rear shock features a 12-way externally single adjustable valving system to make fine tuning your suspension a breeze. The shock utilizes a 5/8 in. hard chrome piston and the best sealing system available on the market. Made from durable aluminum and anodized clear for long lasting good looks. Includes lower mounting bolt kit.
QA1 1993-2002 Camaro & Firebird - 24 Way Double Adj. Rear Shock
Designed just for race classes where stock suspensions are required, the Gen-F rear shock features a 12-way externally single adjustable valving system to make fine tuning your suspension a breeze. The shock utilizes a 5/8 in. hard chrome piston and the best sealing system available on the market. Made from durable aluminum and anodized clear for long lasting good looks. Includes lower mounting bolt kit.
Strange Engineering - 1993-2002 Camaro and Firebird - Front Strut - Single Adjustable.
Lightweight aluminum construction, Bolt-in design, External tuning knobs, Billet steel cross bars and polyurethane bushings
Strange Engineering - 1993-2002 Camaro and Firebird - Rear Shocks - Single Adjustable.
Lightweight aluminum construction, Bolt-in design, External tuning knobs, Billet steel cross bars and polyurethane bushings
Strange Engineering 1993-2002 Camaro & Firebird Single Adjustable Front Shock
These shocks are designed as a bolt-in application for the street or the track. These highly responsive shock absorbers feature all the qualities Strange Performance is known for including an aluminum body for a lightweight and modern design.
