Spohn Panhard Bars-Tubular with Poly Bushings. Replace the factory's weak, stamped steel, flexible panhard bar with one of our heavy duty set-ups! Greatly increases rear's lateral stability.
Spohn Polyurethane Bushing & Chassis Grease - 14 oz Tube
This is the good stuff! Polyurethane bushing manufacturers advise to never use a petroleum based grease for poly bushing lubrication. Polyurethane should only be lubricated with one specific type of grease to insure a long bushing life, and squeak-free performance. Silicone based synthetic water-proof grease, the white sticky stuff!
Spohn Polyurethane Bushing - Total Kit
This total kit supplies you with every polyurethane bushing needed to do your entire car, including transmission mount.
Choose your sway bar sizes.
Note: Does not include motor mounts.
Spohn Polyurethane Motor Mounts (LS1, LS2, LS6 & LS7)
Polyurethane motor mount bushings for LS1, or any other Gen III engine (LS2, LS6, LS7, etc.)
May also be used for universal LSx swap applications (requires 98-02 F-Body style clamshells).
NOTE: Qty. 1 = 1 Pair
Spohn Precision Front Lower Ball Joint - 1970+ GM. The design and features of Spohn precision ball joints ensure that our products will deliver the performance and durability necessary to meet the demanding needs of our customers.
Spohn Suspension - 93-02 F-Body - 10 Bolt (7.5") Rear Support Cover
Six tons of support for your differential!
GM 7.5" 10 bolt rear-end support cover:
Our rear differential cover is not only tough, it's cool looking too. Cast from premium 356 aluminum and heat-treated, the heavy duty cover comes with hardened bearing cap support studs, ARP stainless steel 12-point cover bolts, a magnetic 3/8 in. fill plug, and a gasket.
Spohn Suspension - 93-02 F-Body - 10 Point Roll Cage - 4130N Chrome Moly
0-point roll cages include all the components of an 8-point roll bar plus roof tubes and a windshield crossmember or hoop and windshield post runners. Made of 1-5/8" x .083" wall 4130N chrome moly tubing, our 10-point roll cages are designed to remain behind the firewall and require no modifications to the stock dashboard. 10 point roll cages feature notched tube ends, where applicable, for ease of installation. ** This is a weld-in kit - chrome moly must be TIG welded **
Spohn Suspension - 93-02 F-Body - 14 Point Cage Upgrade Kit - 4130N Chrome Moly
Our 4130N chrome moly 10 point roll cages can be upgraded to a 4130N chrome moly 14 point cage with the addition of this upgrade kit.
Included in this package are:
* Front sub-frame supports
* Door x-braces
* Rear x-brace (behind the driver)
* Left and right side rocker bars
Spohn Suspension - 93-02 F-Body - 14 Point Cage Upgrade Kit - Mild Steel
Our 10 point roll cages can be upgraded to a 14 point cage with the addition of this upgrade kit.
Included in this package are:
* Front sub-frame supports
* Door x-braces
* Rear x-brace (behind the driver)
* Left and right side rocker bars
Spohn Suspension - 93-02 F-Body - 19 mm Poly Rear Sway Bar Bushings
19 mm polyurethane rear sway bar bushings
Note: Qty. 1 = 1 Pair
Spohn Suspension - 1993-2002 F-Body - 21 mm Poly Rear Sway Bar Bushings
Note: Qty. 1 = 1 Pair
Spohn Suspension - 93-02 F-Body - 30mm Poly Front Sway Bar Bushings
Note: Qty. 1 = 1 Pair
Spohn Suspension - 93-02 F-Body - 32mm Poly Front Sway Bar Bushings
Note: Qty. 1 = 1 Pair
Spohn Suspension - 93-02 F-Body - 8 Point Roll Bar - Mild Steel
1-3/4" x .134" wall mild steel roll bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Roll bars are designed to increase chassis stiffness and protect the driver in the event of a crash. The kit includes a main hoop, rear braces, side bars, frame supports, seat crossmember and steel mounting plates. **This is a weld-in kit**
Spohn Suspension - 1993-2002 F-Body - 8 Point Roll Cage - 4130N Chrome Moly
1-3/4" x .083" wall 4130N chrome moly roll bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Roll bars are designed to increase chassis stiffness and protect the driver in the event of a crash. The kit includes a main hoop, rear braces, side bars, frame supports, seat crossmember and steel mounting plates. ** This is a weld-in kit - chrome moly must be TIG welded **
