Spohn 1998-2002 Camaro & Firebird - Polyurethane Transmission Mount - GM
Unlike other brands on the market, this poly transmission mount is the correct height and will not cause driveline vibrations due to pinion angle changes.
Spohn 1998-2002 Camaro & Firebird Bump-Steer Kit
Altering ride height can result in unwanted toe change during suspension travel. This is known as bump steer. Bump steer kits allow the user to alter the tie rod position on the spindle to correct bump steer.
Spohn 1998-2002 Camaro & Firebird Polyurethane Panhard Bar Bushings
Polyurethane bushings for stock panhard bar - complete set
Spohn 1998-2002 Camaro & Firebird Polyurethane Rear Lower Control Arm Bushings
Polyurethane bushings for stock rear lower control arms - complete set
Spohn 1998-2002 Camaro & Firebird Tubular Adjustable Front Upper A-Arms with Spherical Rod Ends
Spohn Performance's front upper control arms set a new, higher standard of performance and quality. When we designed our upper a-arms, we had two goals in mind. One was to provide the performance capabilities needed for the toughest race tracks, the second was to provide the strength and durability required for the demands of a daily driven vehicle. We're proud to say that we have accomplished both. If you are looking for the highest quality front suspension components for the fourth generation F-Body, you just found them!
Spohn 1998-2002 Camaro & Firebird Tubular Front Upper A-Arms with Bushing
Spohn Performance's front upper control arms set a new, higher standard of performance and quality. When we designed our upper a-arms, we had two goals in mind. One was to provide the performance capabilities needed for the toughest race tracks, the second was to provide the strength and durability required for the demands of a daily driven vehicle.
Spohn 1998-2002 LS1 F-body "LSX" Lightweight Motor Mount Bushing Stands
These lightweight "LSX" motor mount stands bolt on in place of the factory's heavy solid cast iron stands on 1998-2002 GM F-Body cars. They look trick, and drop close to 5 pounds! They will work with the stock k-member, or on the Spohn Performance tubular k-member (click here), and any aftermarket k-member designed for stock type motor mount stands.
Spohn Conversion U-Joint - (Stock Driveshaft to 1350 Rear)
You've installed an aftermarket rear, then most likely it came equipped with a 1350 series pinion yoke.
This quality conversion u-joint is what you'll need to connect your stock driveshaft to the 1350 sized pinion yoke.
Don't use your old rusty mounting bolts when installing front lower a-arms (if you managed to get the nuts off without breaking the bolts!).
Sphon front upper A-arm mounting kit. Don't use your old rusty mounting bolts when installing front upper a-arms (if you managed to get the nuts off without breaking the bolts!).
Spohn HTP Fiberglass Camaro SS Style Hood w\ Grille Insert
One of the best ways to distinguish your car from the rest of the crowd is with a quality fiberglass hood from HTP. All hoods come ready to be prepped, fitted and painted by your local body shop. HTP hoods utilize your factory hood latches and hardware (where applicable).
Hood Type: Camaro SS Style - Includes Grille Insert
Click Here for shipping information and instructions.
Spohn HTP Fiberglass Ram-Air (WS6 Style) Hood w\ Screens
One of the best ways to distinguish your car from the rest of the crowd is with a quality fiberglass hood from HTP. All hoods come ready to be prepped, fitted and painted by your local body shop. HTP hoods utilize your factory hood latches and hardware (where applicable).
Spohn HTP Polished Billet Front Grille
One of the best ways to distinguish your car from the rest of the crowd is with a high quality polished billet front grille from HTP.
Ships via UPS Ground
Our boxed LCAs outperform the flexible, stamped-steel arms and soft rubber bushings that come from the factory. Eliminate wheelhop and increase traction with an easy bolt on installation.
All of our LCAs outperform the flexible, stamped-steel arms and soft rubber bushings that come from the factory. Eliminate wheelhop and increase traction with an easy bolt on installation. Adjustability allows for fore and aft centering of the rear to correct for factory tolerances, this also allows for fore and aft movement of the entire rear assembly to provide for adequate tire clearance when running large tires.
