BMR Suspension - 93-02 F-Body A-arms, Lower, DOM, Adjustable, Polyurethane/Rod End Combo, 1" Lowering
BMR's Lowering A-arms lowers the front of your 4th Generation F-body 1” without effecting suspension travel. Based on our well proven traditional A-arm design, these lowering A-arms are constructed from a combination of 1-5/8” and 1-1/4” DOM tubing and feature 3/16” laser cut steel plates and CNC machined ball joint cups.
GM 1993-2002 Camaro & Firebird - Replacement U-Joint
Replace your worn out stock u-joints with these Neapco "Gold" (top of the line) replacement u-joints. These u-joints can be used on the front or the rear of your factory driveshaft.
Note: Sold individually
Hawk Brakes 1993-2002 Camaro & Firebird - HPS Brake Pads - Front
The essence of performance is speed control. And speed control is all about confidence. The confidence is knowing that you can control your vehicle- even when you bring it to the edge. Stopping and slowing are critical aspects of race performance. It only makes sense to go with the best possible braking products for your street performance vehicle. Hawk brake pads are used by champions in every category of the racing industry...they are proven over and over with decades of R&D.
Hawk Brakes 1993-2002 Camaro & Firebird - HPS Brake Pads - Rear
The essence of performance is speed control. And speed control is all about confidence. The confidence is knowing that you can control your vehicle- even when you bring it to the edge. Stopping and slowing are critical aspects of race performance.
One of the best ways to distinguish your car from the rest of the crowd is with a quality fiberglass rear spoiler from HTP. All spoilers come ready to be prepped, fitted and painted by your local body shop.
Rear Spoiler Type: 1998-2002 Camaro SS Style (Fits 93-02)
Freight shipping charges will apply. You will be contacted with shipping charges.
K&N Air Filters & Intakes - 1994-1997 LT1 Camaro & Trans Am -Cold air intake
The K&N FIPK for LT1 Camaro's and Trans Am's replaces the factory pipe and filter assembly. This kit will aid in delivering fresh cool dense air into the engine resulting in more power. The FIPK kit includes tubing, K&N reusable filter, hardware, and installation instructions.
Koni Shocks 1993-2002 Camaro & Trans Am - Sport "SP1" Double Adj. Front Shock
These "SP1" front shocks are double adjustable for both rebound AND compression!
Koni Shocks 1993-2002 Camaro & Trans Am - Sport "SP1" Double Adj. Rear Shock
These "SP1" rear shocks are double adjustable for both rebound AND compression!
Koni Shocks 1993-2002 Camaro & Trans Am - Sport "Yellow" Front Shocks - Pair
The KONI Sport "Yellow" product line is one of our specialties. KONI serves sporting drivers with a carefully designed range of sport shock absorbers. This line focuses on exceptional road-holding and handling properties, combined with an acceptable level of comfort.
Koni Shocks 1993-2002 Camaro & Trans Am - Sport "Yellow" Rear Shocks - Pair
The KONI Sport "Yellow" product line is one of our specialties. KONI serves sporting drivers with a carefully designed range of sport shock absorbers. This line focuses on exceptional road-holding and handling properties, combined with an acceptable level of comfort.
The Moser Engineering Ford 9" rear is for those looking for the ultimate in "bullet-proof" performance and longevity!
All M/E bolt-in 9" housings are made with new heavy duty housing cores, seamless steel tubing (3" O.D., 1/4" wall) and new laser cut brackets.
MSD Performance Ignition - 93-94 Camaro/Firebird - GM LT-1 5.7L Distributor
Leave it to MSD to build an all-out performance distributor to replace the OEM GM LT1 Optispark! We machine an entire billet block of aluminum down into a precise housing that fits in place of the factory piece. Then, we fill it with a reliable new pick-up assembly, a trick timing adjustment mechanism and top it off with an all new MSD distributor cap!
MSD Performance Ignition - 93-95 Camaro/Firebird - Harness, MSD 6 to GM Dual Connector Coil
MSD offers these wiring harnesses to simplify the installation of a MSD 6 series box on late model vehicles. The harnesses plug in between the ignition coil and the factory coil connector. Four wires with corresponding colors and matching connectors then connect directly to the MSD 6 wires. These harnesses reduce the installation time, reduce or eliminate cut wires, and allow you to quickly convert back to the factory ignition.
MSD Performance Ignition - 93-95 Camaro/Firebird LT1 - GM Dual Connector Coil
Top off your GM Ignition system with these great new replacement coils. The GM Coils have MSD performance in factory style housings! MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation Tip: If you plan to install an MSD Ignition with your GM Dual Connector Coil, use a PN 8876 Harness for a direct plug-in installation.
MSD Performance Ignition - 93-96 Camaro/Firebird LT1 - Black Super Conductor Spark Plug Wire Set
The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance!
