BMR Fabrication - 2010 Camaro - 2 Point Strut Tower Brace
BMR's Strut Tower Brace is manufactured from large diameter 1.75" x .120" tubing with heavy duty 1/4" thick mounting plates. Our braces mount directly to the top of the strut towers at the highest leverage point for the greatest amount of stability. The upper strut retainer is replaced with BMR's billet aluminum, high clearance retainer.
BMR Fabrication - 2010 Camaro - 4 point Strut Tower Brace
BMR's Strut Tower Brace is manufactured from large diameter 1.75" x .120" tubing with heavy duty 1/4" thick mounting plates. Our braces mount directly to the top of the strut towers at the highest leverage point for the greatest amount of stability. The upper strut retainer is replaced with BMR's billet aluminum, high clearance retainer.
BMR Fabrication - 2010 Camaro - Subframe Connectors, bolt-on
Stiffen up the chassis for greatly improved handling with Sub Frame Connectors from BMR Fabrication. Constructed of 1" x 1" x .120 wall rectangular tubing and 3/16" CNC laser cut and formed steel plates, these Sub Frame Connectors use pre-existing bolt holes on the Camaro for a truly bolt-in piece. The triangulating design stiffens and reinforces the chassis by joining three key areas of the vehicle's chassis: the front sub frames, carrier bearing location, and the rear sub frame where the rear suspension cradle mounts. By fastening these three locations, the Sub Frame Connectors (SFC015) enrich the handling and response of your Camaro. New hardware is provided for an easy installation time of only one hour. Available in black hammertone or red powdercoat finishes.
BMR Fabrication Suspension - 2010-2011 Chevy Camaro Lowering Spring Kit, Set Of 4, 1.0" Drop
Lowering the center of gravity not only provides visual appeal, it also dramatically improves the handling ability of your Camaro. BMR lowering springs are specifically designed to provide optimal handling without sacrificing ride quality. Our extensive development time produced what we feel to be the optimal rates for this application. By using a 220 lb/in front spring and a 460 lb/in rear spring the car responds with a firm yet comfortable ride with much improved handling characteristics.
BMR Fabrication Suspension - 2010-2011 Chevy Camaro Lowering Spring Kit, Set Of 4, 1.4" Drop
Lowering the center of gravity not only provides visual appeal, it also dramatically improves the handling ability of your Camaro. BMR lowering springs are specifically designed to provide optimal handling without sacrificing ride quality. Our extensive development time produced what we feel to be the optimal rates for this application. By using a 220 lb/in front spring and a 460 lb/in rear spring the car responds with a firm yet comfortable ride with much improved handling characteristics.
BMR Fabrication Suspension - 2010-2011 Chevy Camaro Sway Bar End Link Kit
Reduce End Link deflection and increase sway bar effectiveness with heavy duty Sway Bar End Links from BMR Fabrication. Upgrading sway bars on this platform has proven to bend the weak 3/8” diameter OE end links when subjected to aggressive driving maneuvers.
BMR’s front end link is made from heavy duty 7/8” diameter tubing and utilizes high quality spherical rod ends on each end. The Teflon-lined, application-specific rod ends used for this application feature low-profile, recessed bolt mounting and built-in standoffs. BMR End Link Kits will outperform the OE end links in your Camaro, providing you the stability and control necessary for high performance driving.
BMR Fabrication Suspension - 2010-2011 Chevy Camaro Sway Bar Kit With Bushings, Front (SB016) And Rear (SB017)
BMR swaybars are one of the most noticeable handling improvements you can do for your 2010 Camaro. From the factory, GM did a decent job with spring rates and swaybars but the Camaro begs for more roll resistance to counteract the car's excessive weight. BMR recognizes this need and has a solution that not only increases roll resistance but does so with very minimal decrease in ride quality.
BMR takes advantage of today's technology by manufacturing it's swaybars from tubular steel, a process started in Europe and adopted by most current auto manufacturers today.
SLP's PERFORMANCE FRONT AND REAR SWAY BAR PACKAGE with adjustable links provides an easy-to-install, cost-effective upgrade that will significantly improve traction and the overall handling characteristics of the V6 and V8 Camaros. These tubular bars are both 29mm in diameter compared to the 23mm solid front and rear factory bars. The front bar has two positions of adjustability, while the rear bar has three adjustments. When combined with our optional Sport Suspension Spring Package (SLP V8 Part #70030A or SLP V6 Part #70031A) this Sway Bar Package provides world class handling. All necessary hardware and detailed instructions are included.
Your cart 