07-11 Mustang Shelby GT500 Extra Capacity Intercooler Tank
The Stock Tank holds 32oz of coolant. This stock look tank holds 96oz of coolant.
Tank is sold with a install kit (install kit consist of 6 inch 3/4 in hose, clip and bolt, 3/4 hose adapter and clamps) so its a complete setup to install.
Afco Racing - 07-10 Mustang Shelby GT500 Afco *Dual Fan* Heat Exchanger
New AFCO Dual Fan Heat Exchanger for 07-10 Shelby GT500
Also fits 05+ Mustang GT, Roush, Saleen, Vortech, Whipple
All new from AFCO is the Pro-Series Heat Exchanger for the 2007+ Shelby GT500. Afco's latest offering incorporates dual 10" fans and a matching 10" tall core, the largest in the industry. This is the ultimate cooling solution at the most affordable price, no more paying for a fancy name and spray painted letters when you can have the best for less.
Innovators West - 07-11 Mustang Shelby GT500 Innovators West stock size balancer
Innovators West now offers a complete light-weight replacement balancer for the 2007-2008 5.4L Shelby GT500. We run this balancer on our own Red/White GT500.
METCO Shelby GT500 Supercharger Pulley
2007 and Newer Shelby GT500
One of our most popular products!
Replace the original 3.00" supercharger pulley with our 2.60" overdrive pulley to add 4-5 lbs of boost to your Shelby Mustang. The kit includes a pulley hub machined from high-grade steel that presses onto the blower shaft. The CNC-machined aluminum ring bolts to the steel hub using the supplied stainless steel fasteners, and this two-piece design makes subsequent pulley ring changes a snap.
METCO Shelby GT500 Supercharger Pulley
2007 and Newer Shelby GT500
One of our most popular products!
Replace the original 3.00" supercharger pulley with our 2.80" overdrive pulley to add 2-3 lbs of boost to your Shelby Mustang. The kit includes a pulley hub machined from high-grade steel that presses onto the blower shaft. The CNC-machined aluminum ring bolts to the steel hub using the supplied stainless steel fasteners, and this two-piece design makes subsequent pulley ring changes a snap.
METCO Shelby GT500 Supercharger Pulley
2007 and Newer Shelby GT500
This supercharger pulley kit is based on our popular 2.60" kit, but the included pulley ring matches the diameter of the original pulley at 3.00".
The kit includes a pulley hub machined from high-grade steel that presses onto the blower shaft. The CNC-machined aluminum ring bolts to the steel hub using the supplied stainless steel fasteners, and this two-piece design makes subsequent pulley ring changes a snap.
METCO Shelby GT500 Auxiliary Idler Kit
The Metco Motorsports auxiliary idler kit for the Shelby GT500 is cleverly engineered to be a simple bolt on and to be the ultimate solution to belt slippage.
The kit consists of a heavy-duty, precision-machined aluminum plate that offers three locations for the included 90mm idler pulley. The plate bolts to existing bolt bosses on the vehicle and locates the pulley just to the left of the supercharger pulley, maximizing belt wrap and eliminating slippage. No modifications to the vehicle are necessary. The required fasteners are included, as well as illustrated installation instructions.
Shelby GT500 Auxiliary Idler Kit
METCO Auxiliary Idler Kit
2007 and Newer Shelby GT500 with Kenne-Bell or Whipple Supercharger
The Metco Motorsports auxiliary idler kit for the Shelby GT500 is cleverly engineered to be a simple bolt on and to be the ultimate solution to belt slippage.
The kit consists of a heavy-duty, precision-machined aluminum plate and a billet 90mm idler pulley. The plate bolts to existing bolt bosses on the vehicle and locates the pulley just to the left of the supercharger pulley, maximizing belt wrap and eliminating slippage. No modifications to the vehicle are necessary. The required fasteners are included, as well as illustrated installation instructions.
2007 & Newer Shelby GT500
METCO Auxiliary Idler Kit with Double-Bearing Idler Pulley
The Metco Motorsports auxiliary idler kit for the Shelby GT500 is cleverly engineered to be a simple bolt on and to be the ultimate solution to belt slippage.
The kit consists of a heavy-duty, precision-machined aluminum plate that offers three locations for the included 90mm double-bearing idler pulley. The plate bolts to existing bolt bosses on the vehicle and locates the pulley just to the left of the supercharger pulley, maximizing belt wrap and eliminating slippage. No modifications to the vehicle are necessary. The required fasteners are included, as well as illustrated installation instructions.
Shelby GT500 Pulley Hub
METCO Hub & Hardware
2007 & Newer Shelby GTPulley Mounting 500
This is the same pulley hub included with the Metco Motorsports supercharger pulley kits (MSP2.60, MSP2.70, MSP2.80, & MSP3.00) listed in this section.
This kit includes the CNC-machined pulley ring mounting hub and five stainless steel hub-to-pulley ring fasteners with lockwashers. The pulley hub is black oxide coated for long lasting surface protection.
METCO GT500 Pulley Hub Removal Tool
2007 & Newer Shelby GT500
For Shelby GT500 owners who must remove the Metco Motorsports two-piece supercharger pulley from their GT500, this special tool is available. The design of the supercharger snout in the GT500 application makes it impossible to remove the hub using a standard pulley removal & installation tool, but this specially-designed tool makes the process quick and easy.
Shelby GT500
METCO Supercharger Pulley Ring
2007 & Newer Shelby GT500
These pulley rings are designed for use with Metco Motorsports two-piece supercharger pulleys. If you already have a Metco supercharger pulley on your GT500, one of these rings is all that is needed to change the boost level on your vehicle. These pulley rings will bolt to your existing pulley hub using the same (5) fasteners, and no special tools are required for the change.
METCO Pulley Removal & Installation Tool
Cobra, Lightning, and Shelby GT500
This high-quality tool kit can be configured to remove a supercharger pulley and to install a supercharger pulley. It is precision-machined from the highest quality materials and is designed to be re-used many times.
The kit is designed specifically for use on the factory-supercharged modular applications, and is configured so that the supercharger will not be scratched or damaged in any way when the tool is used. Illustrated instructions are included.
07-up Shelby GT500 Heat Exchanger with Dual Fans. Designed by Shelby, Revan Racing and C/R, this extreme duty heat exchanger uses a proprietary NASCAR core, which features a single row core with a dual pass system, and twin electric fans.
Thump RRR Racing - 07-11 Mustang Shelby GT500 Thump RRR Racing Billet Aluminum Belt Tensioner
PM-1005-GT500 Billet Aluminum Belt Tensioner with 63mm Pulley
Specifically designed for the GT500 Mustang (2007-2011)
