AIRAID is proud to release our new OEM direct replacement filter for the 2010-11 5.4L Mustang Shelby GT500. Don’t settle for a “Universal” fit cone filter, when the AIRAID has been fully engineered and designed to the OEM specification. The AIRAID premium filter offers an excellent combination of air flow and filtration and is fully serviceable making it the last air filter you will need to buy!
BBK Performance Parts - 07-09 Mustang Shelby GT500 Cold Air Induction System
GT500 owners check out these numbers. BBK have just finished Dyno testing this ALL new High-Flow Aluminum BBK Mass-Air / Cold-Air Induction kit for the 2007-2009 Ford Mustang GT500 with some great horsepower results.
The Cold Air / Mass Air combination gave their test vehicle 56 additional horsepower and 33 ft/lb of torque over stock from the simple 30 minute bolt on and those are real rear wheel numbers! Now that’s Bang for the buck !!
How simple? Watch the video and check it out for yourself!
C&L Performance - 07-11 Mustang Shelby GT500 C&L Full Intake
*If you previously purchased your GT500 custom tune from VMP an updated file is free with the purchase of an intake.
Ford Racing - 2010+ Mustang Shelby GT500 Resonator Eliminator Kit
* Fits 2010+ Mustang GT500
* Air Inlet Resonator Eliminator for improved air flow
* Standard on 2010 Mustang SVT 660 Hp Supercharger Upgrade Kit M-6066-MSVTA
Ford Racing Performance Parts - 07-09 Mustang Shelby GT500 62.5MM Cobra Jet Billet Aluminum Throttle Body
COBRA JET BILLET ALUMINUM THROTTLE BODY M-9926-CJ* * Service replacement for the 2008 Mustang FR500CJ race car * Fits in factory location on 2007-2009 SVT Mustang * Twin 63.5mm bore (stock SVT Mustang is twin 60mm) * Tested to over 800 hp in 2007-2009 SVT Mustang applications * Precision machined from billet aluminum to ensure consistency * Polished finish with machined Ford Racing logo * Tested to Ford original equipment specifications for cold and hot weather * Fully assembled, complete with throttle position sensor and actuator motor, ready to bolt on! * Uses OE gears to prevent gear bind and wear common with other aftermarket throttle bodies * Does not include calibration, calibration may be required in some applications
Ford Racing Performance Parts - 07-09 Mustang Shelby GT500 Ford Racing GT500 113MM Cold Air Intake Only
Finally, FRPP offers their intake without a pro-cal, so you can choose to get your own tuning.
M9603CJ123MM - 07-09 Mustang Shelby GT500 FRPP 123MM Cobra Jet CJ Cold Air Kit
2008 COBRA JET COLD AIR KIT
M-9603-CJ*
* Fits 2007-2009 SVT Mustang
* Original equipment on 2008 FR500CJ Cobra Jet
* Kit includes:
o 123 mm Cobra Jet Mass Air Sensor Housing M-9600-CJ
o 2007-2010 SVT Mustang Mass Air Sensor element and zip tube
o Plastic bucket and all fasteners
o Disposable air filter element M-9601-D
* A performance calibration is necessary to prevent engine damage. Calibration not included!
Ford Racing Performance Parts - 07-09 Mustang Shelby GT500 FRPP 123MM Cobra Jet CJ MAF Housing Only
2008 COBRA JET COLD AIR KIT
M-9600-CJ*
* 123 mm Mass Air Flow Sensor Housing
* Add to your underhood "bling" factor with this massive mass air housing that looks as good as it performs!
* Cobra Jet Mass air meter housing - recommended for highly modified 2007-2009 Mustang SVT's
* Proven to support over 800 hp in 2007-2009 Mustang SVT applications
* Eliminates production resonator
* Fits production air tube
* Precision CNC'd billet aluminum
* Polished finish
* This kit includes the housing and mounting tab
* Perfect upgrade to existing Ford Racing Mustang SVT power upgrade, cold air, and supercharger kits!
* Does not include calibration, CALIBRATON REQUIRED, sold for tuner use
Ford Racing Performance Parts - 07-10 Mustang Shelby GT500 65MM Cobra Jet Billet Aluminum Throttle Body
65MM COBRA JET BILLET ALUMINUM THROTTLE BODY M-9926-CJ65* * Fits in factory location on 2007-2010 SVT Mustang * Twin 65mm bore (stock SVT Mustang is twin 60mm bore) * Precision machined from billet aluminum to ensure consistency * Polished finish with machined Ford Racing logo * Tested to Ford original equipment specifications for cold and hot weather * Fully assembled, complete with throttle position sensor and actuator motor, ready to bolt on! * Uses OE gears to prevent gear bind and wear common with other aftermarket throttle bodies * Does not include calibration, calibration may be required in some applications
K&N Air Filters and Intakes - 07-11 Mustang Shelby GT500 K&N Full Intake
K&N advertises their intake to add 53HP with no tune. This is somewhat correct, but I DO NOT recomend installing the intake without a tune. Like every other GT500 intake on the market, the KN increases the MAF sensor housing size to allow more air into the engine. This means the car will run much leaner. It will make more power due to this lean-ness, but will not be safe.
METCO Shelby GT500 Supercharger Pulley
2007 and Newer Shelby GT500
One of our most popular products!
Replace the original 3.00" supercharger pulley with our 2.60" overdrive pulley to add 4-5 lbs of boost to your Shelby Mustang. The kit includes a pulley hub machined from high-grade steel that presses onto the blower shaft. The CNC-machined aluminum ring bolts to the steel hub using the supplied stainless steel fasteners, and this two-piece design makes subsequent pulley ring changes a snap.
METCO Shelby GT500 Supercharger Pulley
2007 and Newer Shelby GT500
One of our most popular products!
Replace the original 3.00" supercharger pulley with our 2.80" overdrive pulley to add 2-3 lbs of boost to your Shelby Mustang. The kit includes a pulley hub machined from high-grade steel that presses onto the blower shaft. The CNC-machined aluminum ring bolts to the steel hub using the supplied stainless steel fasteners, and this two-piece design makes subsequent pulley ring changes a snap.
METCO Shelby GT500 Supercharger Pulley
2007 and Newer Shelby GT500
This supercharger pulley kit is based on our popular 2.60" kit, but the included pulley ring matches the diameter of the original pulley at 3.00".
The kit includes a pulley hub machined from high-grade steel that presses onto the blower shaft. The CNC-machined aluminum ring bolts to the steel hub using the supplied stainless steel fasteners, and this two-piece design makes subsequent pulley ring changes a snap.
METCO Shelby GT500 Auxiliary Idler Kit
The Metco Motorsports auxiliary idler kit for the Shelby GT500 is cleverly engineered to be a simple bolt on and to be the ultimate solution to belt slippage.
The kit consists of a heavy-duty, precision-machined aluminum plate that offers three locations for the included 90mm idler pulley. The plate bolts to existing bolt bosses on the vehicle and locates the pulley just to the left of the supercharger pulley, maximizing belt wrap and eliminating slippage. No modifications to the vehicle are necessary. The required fasteners are included, as well as illustrated installation instructions.
Shelby GT500 Auxiliary Idler Kit
METCO Auxiliary Idler Kit
2007 and Newer Shelby GT500 with Kenne-Bell or Whipple Supercharger
The Metco Motorsports auxiliary idler kit for the Shelby GT500 is cleverly engineered to be a simple bolt on and to be the ultimate solution to belt slippage.
The kit consists of a heavy-duty, precision-machined aluminum plate and a billet 90mm idler pulley. The plate bolts to existing bolt bosses on the vehicle and locates the pulley just to the left of the supercharger pulley, maximizing belt wrap and eliminating slippage. No modifications to the vehicle are necessary. The required fasteners are included, as well as illustrated installation instructions.
