C&L Performance - 07-09 Mustang Shelby GT500 SCT X3 & C&L Intake optional 2.59 pulley
Package deal with C&L Intake and VMP Custom Tuned SCT X3 Handheld Flash Tuner.
Optional: add a VMP 2.59" pulley and 90MM idler.
Intake and tune alone results in a 60-80RWHP and 60-80RWTQ gain, peak numbers will be 510-520RWHP in very good conditions, and 490-500RWHP in summer conditions (100F+). Smaller 2.59" blower pulley (stock is 3") adds 3-4psi and 30-40RWHP and 30-40RWTQ. Peak numbers with pulley will be 550RWHP in good conditions and 525RWHP in summer conditions (100F+).
Ford Racing Performance Parts - 07-09 Mustang Shelby GT500 Ford Racing GT500 113MM Cold Air Intake and Pro-Cal Tuner Package
M-9603-SVT07
- Fits 2007-09 SVT Mustang
- Kit includes 113 mm Mass Air Meter
- Mounts in the stock location
- Premium fuel only
- 40 hp increase over stock using correction factor SAE J1349
- Due to multiple calibrations, online registration is required to receive Pro-Cal 2 tool after purchase.
- E.O. #D-308-12
- Good for those looking to mod their GT500 but still be very warranty friendly
M9603SVT07
NGK Spark Plugs - 07-11 Mustang Shelby GT500 NTK AFX Wideband O2 Sensor and display for SCT
NGK Powerdex AFX Wide Band Meter.
Includes:
•Bosch Wide band oxygen sensor (NTK sensor optional)
•Control module with red LED display
•13' wiring harness
•Exhaust boss and plug.
SCT Performance Tuners - 07-09 Mustang Shelby GT500 Custom SCT X3 & FRPP 113MM Intake optional 2.59 pulley
Package deal with FRPP 113MM Intake and VMP Custom Tuned SCT X3 Handheld Flash Tuner.
Optional: add a VMP 2.59" pulley and 90MM idler.
Intake and tune alone results in a 60-80RWHP and 60-80RWTQ gain, peak numbers will be 510-520RWHP in very good conditions, and 490-500RWHP in summer conditions (100F+). Smaller 2.59" blower pulley (stock is 3") adds 3-4psi and 30-40RWHP and 30-40RWTQ. Peak numbers with pulley will be 550RWHP in good conditions and 525RWHP in summer conditions (100F+).
SCT Performance Tuners - 07-11 Mustang Shelby GT500 & 96-10 GT 9-pin DIN cable for Analog Input on SCT X-Calibrator V2
9-pin DIN cable/connector assembly only, requires some wiring to connect to widebands and other sensors. Allows you to datalog the analog output of a wideband with your X-Cal2.
This cable has a male and female end on it, you will need to cut off the female end and wire into it, the male end plugs into the SCT X-Cal2 tuner.
SCT Performance Tuners - 07-11 Mustang Shelby GT500 & 96-10 GT Custom Tuned SCT X3 Flash Tuner for Ford Vehicle from VMP
ABOUT THE NEW SCT X-Calibrator Version 3
The X3 is the newest flasher from SCT. It was necessary for SCT to introduce this product to support future vehicles with new processor types. The X2 is no longer available but is still supported.
SCT Performance Tuners - 07-11 Mustang Shelby GT500 & 96-10 GT Pre-Loaded Generic SCT X3 Flasher
Comes pre-loaded from SCT with tunes for many common 94+ Fords. With an X3 Flasher you will recieve the following benfits / adjustment abilities:
SCT Performance Tuners - 07-11 Mustang Shelby GT500 Custom SCT X3 Flash Tuner and High-Flow Intake
Want to pump up the performance of your Shelby GT or GT-H Mustang? This package will add 6-10HP and 6-10TQ with a more agressive custom tune and high flow inlet tube for your stock Ford Racing CAI.
SCT Performance Tuners - 07-11 Mustang Shelby GT500 Custom SCT X3 Flasher/Tuner
The Mustang Shelby GT500 is the most powerful production Mustang Ford has ever produced. The GT500 has an amazing amount of potential waiting to be unlocked. With a safe 93 octane tune we picked up 60RWHP and 40RWTQ! Stock the GT500 will dyno at 420-440RWHP and 440RWTQ SAE corrected on an industry standard Dynojet. With a 15% drivetrain loss that is 500-520HP at the crank. We have spent countless hours perfecting our GT500 tunes on our own test vehicle and have used them on hundreds of customers cars.
VMP Tuning - 07-11 Mustang Shelby GT500 2.3L TVS SC with X3 Tuner & Idler
The new VMP GT500 2.3L TVS Supercharger with an SCT X3 Tuner custom programmed by VMP and a 90MM replacement idler. 07-09 must already have a CAI (10-11 come stock with CAI), if you don't have one it may be added from the drop down menu.
* Inclues 2.5" pulley & high flow inlet elbow
* 630-675RWHP out of the box with cal (depending on TB and exhaust)
* Uses high quality/high performance Eaton TVS rotorpack
* Includes 2.5" pulley for 16-17psi with stock lower
* Includes cnc port matched high flow inlet elbow ready to accept up to a 72MM TB
* 1 year warranty
VMP Tuning - 07-11 Mustang Shelby GT500 2.3L TVS Supercharger Upgrade
The new VMP GT500 2.3L TVS Supercharger
* Inclues 2.5" pulley & high flow inlet elbow
* 630-675RWHP out of the box with cal (depending on TB and exhaust)
* Uses high quality/high performance Eaton TVS rotorpack
* Includes 2.5" pulley for 16-17psi with stock lower
* Includes cnc port matched high flow inlet elbow ready to accept up to a 72MM TB
* 1 year warranty
VMP Tuning - 07-11 Mustang Shelby GT500 Pulley & Custom Tune Upgrade Package for FRPP M-9603-SVT07 113MM CAI Kit, KR, or other intake
Already have the Ford Racing Intake and Pro-Cal tuner for your GT500? Looking for more power? Look no further, at VMP we can extract even more power from your FRPP M-9603-SVT07 equipped GT500 or KR.
VMP Tuning - 07-11 Mustang Shelby GT500 Pulley and Custom Tune Upgrade Package for FRPP 2.3L TVS M-6066-SGT
This package is for 07-09 GT500s with the TVS and 10+ GT500s with the TVS.
If you already have a Ford Racing Performance Parts 2.3L TVS Blower "2007-2009 MUSTANG SVT SUPERCHARGER UPGRADE KIT" M-6066-SGT and are looking for more power, look no further than this upgrade package from VMP.
VMP Tuning - 07-11 Mustang Shelby GT500 Ultimate Pulley Removal & Installation Tool
VMP Ultimate pulley puller and installer tool for Shelby GT500, comes in a hardsided foam-lined case.
Our tool utilizes fine thread bolts, bearings, and a supplied grease pack which makes using our tool a breeze. Less expensive tools that use course thread bolts and no bearing can make a pulley removal and installation 10 times harder, our tool avoids these headaches due to it's proper design.
VMP Tuning - 07-11 Mustang Shelby GT500 VMP Custom Tunes
Do you already own a custom SCT X-Cal2, X3, or Livewire flasher? If you do we can email you our custom Shelby tunes.
Loading the tunes onto the SCT tuner is very easy. A standard USB A to B cable is used to load files onto the SCT Tuner. Click on the link at the top right "How-To load an email tune" for instructions. Optionally you may send your tuner into us for programming.
