It has always been common practice to reinforce Ford's 8.8" rearend with a stronger, cast rear cover. Unfortunately, with the '05 model, the panhard rod prevents this. BMR has an easy solution. Our relocation bracket moves the drivers side of the panhard rod to the back of the OE mount, providing 1" of additional clearance.
Installation is simple and rear end geometry remains unaffected. We offer the bracket by itself or in our complete kit.
BMR Fabrication 2005-2010 Mustang Moser cover, relocation bracket and MPHR012 adjustable panhard rod.
It has always been common practice to reinforce Ford's 8.8" rearend with a stronger, cast rear cover. Unfortunately, with the '05 model, the panhard rod prevents this. BMR has an easy solution. Our relocation bracket moves the drivers side of the panhard rod to the back of the OE mount, providing 1" of additional clearance. Installation is simple and rear end geometry remains unaffected. We offer the bracket by itself or in our complete kit shown above. Available in Black Hammertone or red powdercoat.
BMR Fabrication 2005-2010 Mustang Tubular "On-Car" Adjustable Panhard Rod
The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are made with small diameter tubing and rubber bushings that allow deflection under load. BMR panhard rods are all made from larger diameter 1.25", heavy wall DOM tubing and utilize either greaseable polyurethane bushings or HD spherical bearings by QA1. The adjustable versions use left-hand and right-hand thread to allow easy "on-car" adjustment. Our CNC machined adjusters are made from 4130 chromoly and have rolled threads. All rod end spacers are 304 stainless. You won't find better quality pieces.
BMR Fabrication 2005-2010 Mustang Tubular Panhard Rod
The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are made with small diameter tubing and rubber bushings that allow deflection under load. BMR panhard rods are all made from larger diameter 1.25", heavy wall DOM tubing and utilize either greaseable polyurethane bushings or HD spherical bearings by QA1. The adjustable versions use left-hand and right-hand thread to allow easy "on-car" adjustment. Our CNC machined adjusters are made from 4130 chromoly and have rolled threads. All rod end spacers are 304 stainless. You won't find better quality
BMR Fabrication 2005-2010 Mustang - Upper Panhard Rod Support
Since the panhard rod is responsible for keeping the rear end centered in the chassis, their is a significant load placed on the panhard rod mounts during cornering. Due to this load, Ford reinforced the mount with a vertical brace that parallels the panhard rod. Unfortunately this brace is little more than stamped, light gauge metal and does little for reinforcement. Our boxed tube support reinforces this critical mount to prevent deflection and can be easily installed in less than 1 hour. The passenger side has a slight bend for additional exhaust clearance. Available in Black Hammertone or red powdercoat.
Your cart 