BMR Fabrication 2005-2010 Mustang Moser cover, relocation bracket and MPHR012 adjustable panhard rod.
It has always been common practice to reinforce Ford's 8.8" rearend with a stronger, cast rear cover. Unfortunately, with the '05 model, the panhard rod prevents this. BMR has an easy solution. Our relocation bracket moves the drivers side of the panhard rod to the back of the OE mount, providing 1" of additional clearance. Installation is simple and rear end geometry remains unaffected. We offer the bracket by itself or in our complete kit shown above. Available in Black Hammertone or red powdercoat.
BMR Fabrication 2005-2010 Mustang - Non-adjustable A-arms with polyurethane bushings
BMR tubular A-arms are a lightweight alternative to your factory stamped steel arms. We offer them in two styles, standard and adjustable. Both models feature CNC machined rear pivot points, heavy duty 1.25" DOM tubing, and new ball joints sourced from Fords OE supplier. Unlike our competitors, these A-arms are also compatible with your OE K-member.
BMR Fabrication 2005-2010 Mustang - Prothane "Bullet" motor mounts
BMR Fabrication 2005-2010 Mustang - Race Tubular K-member with no motor mount provisions - manual Pinto-style rack (requires part number RP001 or RP002)
Our tubular K-member uses an integrated mount system, saving up to 5 lbs. over the competitions' designs. The OE K-member with motor mounts weighs 44 lbs. while our integrated design weighs only 24 lbs., a 20 lb. weight reduction. Designed to be used with BMR or factory A-arms and spindles. Fits V6 and V8 models.
BMR Fabrication 2005-2010 Mustang - Race Tubular K-member with no motor mount provisions - OE Power Rack
Our tubular K-member uses an integrated mount system, saving up to 5 lbs. over the competitions' designs. The OE K-member with motor mounts weighs 44 lbs. while our integrated design weighs only 24 lbs., a 20 lb. weight reduction. Designed to be used with BMR or factory A-arms and spindles. Fits V6 and V8 models.
BMR Fabrication 2005-2010 Mustang Rear 22mm Swaybar with mounting bushings and billet end links
BMR sway-bars decrease body roll in your 2005+ Mustang resulting in a more predictable, neutrally balanced suspension. Our sway-bars are made from high quality, cold formed aircraft spec tubing which allows the bar to resist torsional fatique much better than hot formed bars. Front swaybar is a lightweight, hollow 35mm bar while the rear is solid 22mm. All necessary bushings and hardware included. Available in Black Hammertone or red powdercoat. NOTE: BMR rear swaybars are not compatible with convertible models unless the additional OE convertible bracing is removed.
BMR Fabrication 2005-2010 Mustang - Rear billet swaybar end links
BMR sway-bars decrease body roll in your 2005+ Mustang resulting in a more predictable, neutrally balanced suspension. Our sway-bars are made from high quality, cold formed aircraft spec tubing which allows the bar to resist torsional fatique much better than hot formed bars. Front swaybar is a lightweight, hollow 35mm bar while the rear is solid 22mm. All necessary bushings and hardware included. Available in Black Hammertone or red powdercoat. NOTE: BMR rear swaybars are not compatible with convertible models unless the additional OE convertible bracing is removed
BMR Fabrication 2005-2010 Mustang - Rear control arm package
Anti-wheelhop Package - consists of Billet Lower Controls(ACA004) and Control Arm Relocation Brackets(CAB005) SAVE $25!
BMR Fabrication 2005-2010 Mustang - Rear control arm package - Level 1
LEVEL 1 - Package includes Billet Lower Control Arms(ACA004), Upper Control Arm with polyurethane bushings(UTCA017), and Upper Control Arm Mount(UCM001). SAVE OVER $40!
BMR Fabrication 2005-2010 Mustang - Rear control arm package - Level 2
LEVEL 2 - Package includes Poly/Spherical Boxed Lower Control Arms(TCA022), Adjustable Upper Control Arm with polyurethane bushings(UTCA019), and Upper Control Arm Mount(UCM001). SAVE $30!
BMR Fabrication 2005-2010 Mustang - Rear control arm package - Level 3
LEVEL 3 - Package includes Race Lower Control Arms with QA1 XR series rod ends(TCA020), Adjustable Upper Control Arm with QA1 spherical bearings(UTCA020), Upper Control Arm Mount(UCM001), and Energy Suspension multi-durometer polyurethane differential bushing(EN-1). SAVE $50!
BMR Fabrication 2005-2010 Mustang - Rear tunnel brace w/o loop - V6, GT and GT500
NHRA required for cars running 12.99 or quicker in the quarter mile. We manufacture our loops out of NHRA legal 1/4" x 2" plate and both designs are true bolt-ons using existing mounting holes, no welding or drilling required. Available in Black Hammertone or red powdercoat. Fits V6 and V8 models.
BMR Rear tunnel brace with loop - V6, GT and GT500
NHRA required for cars running 12.99 or quicker in the quarter mile. We manufacture our loops out of NHRA legal 1/4" x 2" plate and both designs are true bolt-ons using existing mounting holes, no welding or drilling required. Available in Black Hammertone or red powdercoat. Fits V6 and V8 models.
BMR Fabrication 2005-2010 Mustang Rear Xtreme Anti-roll Bar
Rear anti-roll bars have been proven to eliminate torque steer and body roll during hard launches and will drastically improve the cars consistency as well as stability going down the track. The new Mustang chassis is even more susceptable to launch inconsistencies with only one, center mounted upper control arm. BMR's simple design allows it to work with stock or aftermarket rear end housings and it will clear all aftermarket exhausts and suspension components. Available in Black Hammertone or red powdercoat. NOTE: Recommended for drag race applications only.
BMR Fabrication 2005-2010 Mustang Relocation bracket only
It has always been common practice to reinforce Ford's 8.8" rearend with a stronger, cast rear cover. Unfortunately, with the '05 model, the panhard rod prevents this. BMR has an easy solution. Our relocation bracket moves the drivers side of the panhard rod to the back of the OE mount, providing 1" of additional clearance. Installation is simple and rear end geometry remains unaffected. We offer the bracket by itself or in our complete kit shown above. Available in Black Hammertone or red powdercoat
