BMR Fabrication 2005-2010 Mustang Front 35mm Swaybar
BMR sway-bars decrease body roll in your 2005+ Mustang resulting in a more predictable, neutrally balanced suspension. Our sway-bars are made from high quality, cold formed aircraft spec tubing which allows the bar to resist torsional fatique much better than hot formed bars. Front swaybar is a lightweight, hollow 35mm bar while the rear is solid 22mm. All necessary bushings and hardware included. Available in Black Hammertone or red powdercoat. NOTE: BMR rear swaybars are not compatible with convertible models unless the additional OE convertible bracing is removed.
BMR Fabrication 2005-2010 Mustang - Front end package Includes Tubular K-member(KM010) and non-adjustable A-arms(AA010) - Save $70!
Drops up to 34 lbs. off the nose of your car and creates additional clearance for long tube headers and aftermarket turbo kits.
BMR Fabrication 2005-2010 Mustang - Handling Package
A step above our Lowering Package, these packages also address spring dampening, body roll, and chassis rigidity.
BMR Fabrication 2005-2010 Mustang - Handling Package
A step above our Lowering Package, these packages also address spring dampening, body roll, and chassis rigidity.
BMR Fabrication 2005-2010 Mustang - Handling Package Level 2
A step above our Lowering Package, these packages also address spring dampening, body roll, and chassis rigidity.
BMR Fabrication 2005-2010 Mustang - Handling Package Level 2
A step above our Lowering Package, these packages also address spring dampening, body roll, and chassis rigidity.
BMR Fabrication 2005-2010 Mustang - HD Boxed subframe connectors
Boxed subframe connectors are made from heavy duty 1.5"x 2" main tubing and use both 1"x 2" and 1" gussets as well as 3/16" laser cut weld plates.
The design can be welded without the need to remove interior carpet.
The design reinforce the rear control arm mount.
The design will retain OE ground clearance.
BMR Fabrication 2005-2010 Mustang - Level 1 Complete front end kit
DROP 94 LBS. OFF THE FRONT END! Package includes BMR Tubular K-member(KM010), BMR non-adjustable A-arms(AA010), BMR Tubular Radiator Support(RS002), QA1 adjustable front struts(H2004), QA1 Camber/Caster plates(CC105MU), QA1 coil-over spring kit(MU175), Strange Front Disc Brake Kit(B4148WC). SAVE OVER $115!
BMR Fabrication 2005-2010 Mustang - Level 1 Rear drag race package
BMR Level 1 drag race package is a great way to hook up the rear of your S197 Mustang. Level 1 is perfect for the Street/Strip racer allowing complete adjustability without compromising street manners.
BMR Fabrication 2005-2010 Mustang - Level 2 Rear drag race package
BMR Level 2 Drag Race Package is the best way to hook up the rear of your S197 Mustang. Our Level 2 Package is recommended for the serious racer and has already been proven on BMR's 7 Second Turbo car.
BMR Fabrication 2005-2010 Mustang - Loop upgrade for rear tunnel brace - V6, GT and GT500
NHRA required for cars running 12.99 or quicker in the quarter mile. We manufacture our loops out of NHRA legal 1/4" x 2" plate and both designs are true bolt-ons using existing mounting holes, no welding or drilling required. Available in Black Hammertone or red powdercoat. Fits V6 and V8 models.
BMR Fabrication 2005-2010 Mustang - Lowering package - Convertible
A lowered car not only has more curb appeal but, when done properly, can have a significant handling advantage as well. What most people don't realize is that just installing a set of lowering springs without addressing other components can actually have a detrimental effect on handling, acceleration traction, and ride quality. BMR's Lowering Package for the 2005 and newer Mustang chassis comes complete with everything you need to not only correct these issues but to enhance handling as well.
BMR Fabrication 2005-2010 Mustang - Lowering package - Hard Top
A lowered car not only has more curb appeal but, when done properly, can have a significant handling advantage as well. What most people don't realize is that just installing a set of lowering springs without addressing other components can actually have a detrimental effect on handling, acceleration traction, and ride quality. BMR's Lowering Package for the 2005 and newer Mustang chassis comes complete with everything you need to not only correct these issues but to enhance handling as well.
BMR Fabrication 2005-2010 Mustang Moser 8.8" aluminum rear end cover
It has always been common practice to reinforce Ford's 8.8" rearend with a stronger, cast rear cover. Unfortunately, with the '05 model, the panhard rod prevents this. BMR has an easy solution. Our relocation bracket moves the drivers side of the panhard rod to the back of the OE mount, providing 1" of additional clearance. Installation is simple and rear end geometry remains unaffected. We offer the bracket by itself or in our complete kit shown above. Available in Black Hammertone or red powdercoat.
BMR Fabrication 2005-2010 Mustang Moser cover, relocation bracket and MPHR012 adjustable panhard rod.
It has always been common practice to reinforce Ford's 8.8" rearend with a stronger, cast rear cover. Unfortunately, with the '05 model, the panhard rod prevents this. BMR has an easy solution. Our relocation bracket moves the drivers side of the panhard rod to the back of the OE mount, providing 1" of additional clearance. Installation is simple and rear end geometry remains unaffected. We offer the bracket by itself or in our complete kit shown above. Available in Black Hammertone or red powdercoat.
